Wrangler Blues
Moderator: Tec Team
-
- Posts: 160
- Joined: May 23rd, 2007, 9:21 am
- Location: Walkerton,In
Wrangler Blues
Asking for some help out there. My 87 Wrangler has cost me more money in the last 4 months then my ex wife did the first year. I have an opportunity to swap for a 1993 Cherokee sport 4 inch lift 32-12.50-15 mtzs evan up anybody have any ideas as what to look for (problems) on this Cherokee????? I hate my Wrangler over $3500.00 in it and still dragging the ground
Have A Blessed Day
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
- green50gt
- Posts: 1356
- Joined: January 16th, 2007, 10:08 pm
- Location: Goshen
Boy Bode is quite the salesman I've noticed. Check the floorboards as proashol said. Also check out the underside of all the doors. check each invidual doors power windows,(if applicable) check the drip rails all the way around for bubbles and or rust, check around the steering box bolts...your looking for cracks or if it looks like the steering box has been pulled in towards the motor....walk away very quickly if this is the case. check out the unibody all over for dents, creases, etc. then on that year, look at all the rocker panels in depth, push around, they typically go righ under the rear doors if its a 4 door. that is all i can think of for now.
-
- Posts: 160
- Joined: May 23rd, 2007, 9:21 am
- Location: Walkerton,In
Ok guys thanks for the info. It does has some cancer problems(rockers on both sides need major renovation. but it is a 2 door and undercarage is in good shape. underside of doors are in good shape. The 4.0 is a new create motor thats been chiped. This thing roastes the 12.50 33 thornburgs right off the wheels. I think I will be saying goodby to the 87 black wrangler. Thanks for all the info
Have A Blessed Day
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
- Run4lo
- Posts: 537
- Joined: January 9th, 2007, 4:01 pm
- Location: Goshen, IN
- Contact:
- xjjeepthing
- Posts: 716
- Joined: January 18th, 2007, 9:30 pm
- Location: Plymouth IN
- Contact:
-
- Posts: 160
- Joined: May 23rd, 2007, 9:21 am
- Location: Walkerton,In
OOHH YYAAA gota have the cobra 40 channel. Hay xjjeepthing nice rig but arnt you a ford man?? And why is it that Oliver Ford parts Dept is open on Saturdays and no Jeep dealers have a parts dept open??
Ford stands for (For Off Road Driving) I was a young 1974 F250 highboy who has growin up to be a JEEP MAN..
Ford stands for (For Off Road Driving) I was a young 1974 F250 highboy who has growin up to be a JEEP MAN..
Have A Blessed Day
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
Dave<><
It’s Hip to be a JEEP Builder
Wheeling For Christ
- xjjeepthing
- Posts: 716
- Joined: January 18th, 2007, 9:30 pm
- Location: Plymouth IN
- Contact:
- xjjeepthing
- Posts: 716
- Joined: January 18th, 2007, 9:30 pm
- Location: Plymouth IN
- Contact:
Tazhuntin wrote:I thought this was a family site, I have been hearing that four letter "F" word too many times, and to correct you, it is "Found on the Road DEAD"
Hey know it pays my bills.
LOL
God grant me the serenity to accept the impossible trails I cannot crawl, courage to crawl the twisted trails I can and the wisdom to keep the tire side down.